Products
About Us
On-Line Store
News & Press
Resources
The Lab Blog
Homepage
 
 
 ELECTRONIC MUSIC > Modular Synthesizer
MOOG™ COMPATIBLE SYNTHESIZER MODULES & PARTS
Grove Audio announces the availability of electronic synthesizer modules compatible with modules manufactured by several companies using the original Moog™ synthesizer specifications. These modules offer functional combinations of basic synthesis building blocks that will compliment any existing or newly built electronic music instrument.

Many common features of the original modules created by Robert Moog have been reproduced in these new units, allowing them to be directly integrated with vintage units and many existing new units from several manufacturers.

To compliment the new modules, a line of accessories has also been included. Power systems made up of power distribution boards, power cables, and power controller modules allow construction of a complete synthesizer system. Two power supply modules providing all the necessary voltages are in development. Blank panels in various widths are available to fill empty slots in module cabinets.
 MODULES
 
GMS-782
GMS-782
DUAL VC LFO/VCA
GMS-725
GMS-725
MIXER/PROCESSOR
 
GMS-742
GMS-742
DUAL CHANNEL MIDI/CV CONVERTER

 ORDERING INFORMATION
GMS-724
GMS-724
MULTIPLES
 
PM Resonator
PMRESO
PM RESONATOR
PM Resonator MT
PMRESO-MT
PM RESONATOR FOR MOTM
 
GMS-719A
GMS-719A
SEQUENCER INTERFACE
1st QTR. 2012
GMS-714
GMS-714
QUAD VCA/GATE
1st QTR. 2012
 
GMS-760/GMS-761
GMS-760/GMS-761
QUAD VOLTAGE SEQUENCER/CLOCK
1st QTR. 2012
GMS-1370
GMS-1370
STEREO EFFECTS
3rd QTR. 2012
 
 UTILITY MODULES
 
GMS-904
GMS-904
QUAD ATTENUATOR/VOLTAGE SOURCE

 
GMS-930
GMS-930
POWER CONTROL
GMS-932
GMS-932
POWER DISTRIBUTION
 
 ACCESSORIES
 
PDS-24
PDS-24
Power Distribution Board
PSC-2
PSC-2
Power Cable - 2.5 Ft.
 
BLNK-1W
BLNK-1W
Single Width Blank Panel
BLNK-2W
BLNK-2W
Double Width Blank Panel
 
 PARTS FOR DIY SYNTHESIZER BUILDERS
 
DIY Synth Parts
DIY Synth
Parts & Accessories
 
GENERAL TECHNICAL SPECIFICATIONS
Waveform Voltage Range 10 Volts Peak-to-Peak
Frequency Control Voltage Standard 1 Volt per Octave
Envelope Control Voltage Range 0 - 5 Volts
Gate Control Voltage Range 0 - 5 Volts (1.8 Volt Threshold)
Typical Input Impedance 100K Ohms
Typical Output Impedance 1K Ohms (short circuit protection)
Module Power +15 Volts, -15 Volts, +5 Volts (for modules with digital logic)
Module Size Panel height - 8.75 inches (222 mm); Panel width - multiples of 2.125 inches (54 mm)