GMS-709a DADSR
Dual DADSR Envelope generator includes delay
The GMS709A Dual DADSR Envelope Generator provides two DADSR (delay, attact, decay, sustain, release) envelope generators in one 1MU module. The delay, attack, decay and release times are variable over a range of 1 millisecond to 10 seconds. The delay adjustment places an adjustable amount of delay that occurs after the gate triggers a cycle and prior to the start of the attack portion of the waveform.
Panel controls select the mode of operation, normal (single cycle), gated (cycle self triggers and repeats while gate input is high), and loop (cycle retriggers itself at end). The shape of the envelope can be set to exponential or linear. The polarity of the output wave can be set to positive (above zero) or negative (below zero). There is also a manual gate trigger button on each channel.
Resources
- User Manual
- Datasheet
- ModularGrid
Technical Specifications
| Envelope Generator Section | |||
|---|---|---|---|
| Attack, Decay, Release Range | 1 millisecond to 10 seconds | ||
| Voltage Control Range | 0-5V for 1 ms to 10 second range | ||
| Output Amplitude | 0-5 Volts | ||
| Envelope Output | Both positive and negative envelope available simultaneously | ||
| Typical Input Impedance | 100K Ohms | ||
| Typical Output Impedance | 1K Ohms (short circuit protection) | ||
| Module Power | +15 Volts 45 mA. -15 Volts 45 mA. |
||
| Module Size | Panel height - 8.75 inches (222 mm) Panel width - 4.25 inches (108 mm) Depth (behind panel) 2.1 inches (53 mm) |
209.00
