GMS-775EU Sequencer 8

8 Step CV and Gate Sequences for Eurorack

The GMS-775EU Sequencer 8 can be operated as an eight step voltage sequencer with gate outputs. A clock to provide advancement to the next step in the sequence can be derived from an external clock source or an internal low frequency oscillator. A reset input allows setting the sequence to step 1.  


A three position toggle switch in each step can be set to output a gate signal for that position or reset the sequence back to the beginning. An internal jumper selects the reference voltage supplied to the step potentiometers. The three ranges are 0-+2.5 Volts, 0-+5 Volts, and 0-+10 Volts.

An additional panel toggle determines whether the sequencer is running, stopped, or reset.

There are external clock and reset input connectors on the front panel. These allow external controllers to start, synchronize, and step the sequence in time with an external sequence. 

Multiple modules can be chained for longer sequences. Modules are connected through rear panel connectors. The chain mode is selected with a front panel toggle switch.


Technical Specifications

Internal Clock Frequency
0.5 Hz. - 30 Hz.

Gate Output Range
0-5 V.

CV Output Range
0-2.5 V.; 0-5 V.: 0-10 V. (jumper selection)

Typical Input Impedance
50K Ohms

Typical Output Impedance
220 Ohms (short circuit protection)

Module Power
+12 Volts 100 mA.

Module Size
Panel height - 5.03 inches (128 mm)
Panel width - 3.2 inches (81 mm)
Depth (behind panel) 2.1 inches (53 mm)



We produce electronic synthesizer modules in the two most popular formats, MU (Moog compatible 5U) and EU (Eurorack compatible 3U). A wide range of voltage controlled modules including oscillators, amplifiers, mixers, envelope generators, special effects units, wave generators, filters, power systems and cases allow users complete freedom to configure any desired electronic music instrument.


Grove Audio builds microphones, preamplifiers, equalizers, compressors and other professional audio equipment for performance and studio use. We build units in popular formats such as 19 inch rack mount and 500 series 3U modules. We can also produce custom designs on request. Contact us for a consultation.


You can explore all of our products, download spec sheets, and purchase our products in the Grove Audio Synth Store. You can also learn about our periodic specials and new product introductions. Click the button below to go directly to the store.

Follow Us!

Grove Audio Help
  • Email:
  • Phone: 608 886-6503


Grove Audio has been manufacturing professional recording and modularized electronics for musicians and performers since 1995.