web design software

GMS-775 Sequencer 8

8 Step CV and Gate Sequences

The GMS-775 Sequencer 8 can be operated as an eight step voltage sequencer with gate outputs. A clock to provide advancement to the next step in the sequence can be derived from an external clock source or an internal low frequency oscillator. A reset input allows setting the sequence to step 1.  


A three position toggle switch in each step can be set to output a gate signal for that position or reset the sequence back to the beginning. An internal jumper selects the reference voltage supplied to the step potentiometers. The three ranges are 0-+2.5 Volts, 0-+5 Volts, and 0-+10 Volts.

An additional panel toggle determines whether the sequencer is running, stopped, or reset.

The external clock input connector is a two circuit connector with the clock signal on the tip and the reset signal on the ring. This allows external controllers to start, synchronize, and step the sequence in time with an external sequence. 


Technical Specifications

Mixer Section

Clock 0-5V
Reset 0-5V

Typical Input Impedance
100K Ohms

CV 0-2.5V; 0-5V; 0-10V
Internal jumper selection
Gate 0-5V

Typical Output Impedance
1K Ohms (short circuit protection)

Module Power
+15 Volts 25 mA.
-15 Volts 25 mA.

Module Size
Panel height - 8.75 inches (222 mm)
Panel width - 2.125 inches (54 mm)
Depth (behind panel) 2.1 inches (53 mm)



We produce electronic synthesizer modules in the two most popular formats, MU (Moog compatible 5U) and EU (Eurorack compatible 3U). A wide range of voltage controlled modules including oscillators, amplifiers, mixers, envelope generators, special effects units, wave generators, filters, power systems and cases allow  users complete freedom to configure any desired electronic music instrument. 


Grove Audio builds microphones, preamplifiers, equalizers, compressors and other professional audio equipment for performance and studio use. We build units in popular formats such as 19 inch rack mount and 500 series 3U modules. We can also produce custom designs on request. Contact us for a consultation. 


A wide range of electronic parts, kits, tools and accesories is available on the Strange Hardware site. Fast order response, free shipping specials and prompt service will get you the parts you need for your building, restoration or repair projects. You will find high tech hardware sure to inspire the inventor in you. 


You can explore all of our products, download spec sheets, and purchase our products in the Grove Audio Synth Store. You can also learn about our periodic specials and new product introductions. Click the button below to go directly to the store.


256 N Main St.
Cottage Grove WI 53527

Email: sales@groveaudio.com
Phone: 608 886-6503

Thanks for filling out form!